The DAT 4035 IS is an Intrinsically Safe Loop Powered isolated Signal Transmitter.
- Universal Input and a 4-20mA output.
- PC programmable Transmitter that can accept thermocouples, RTD, mA, V, mV, resistance and potentiometer on the input.
- Will linearize the input and provide a 4-20mA output signal. The output is isolated from the input.
- Accurate to 0.1% full scale and has less than 0.01%/°f thermal drift.
- Programmable by PC based software which has been developed by DATEXEL to be user friendly.
- For resistance and RTD sensors it is possible to program the cable compensation for 3 or 4 wires.
- It is possible to set the minimum and maximum values of the input and output ranges in any point of the scale, keeping the minimum span shown in the Data Sheet. Also, high burn out alarm or low burn out alarm is selectable.
- Isolated between the power supply and the input/output to 2000V, eliminates the effects of any ground loops and allows the use of the transmitter in heavy environmental conditions found in industrial applications. The -In compliance with the standard 89/336/CEE on the Electromagnetic Compatibility.
- Housed in a plastic enclosure of 12.5 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards.
- Able to measure and linearize the standard thermocouples with internal cold junction compensation.
